“At more than 9 a.m
.
yesterday, at houbeitun section of Qianfeng road in Taiyuan City, three workers encountered a high-voltage line during the construction process, and unfortunately CLP died
.
The reporter learned from the scene that the high-voltage line is 10kV, and from the video, you can see that at about 8:58, the scaffold moved in the direction of the high-voltage line
.
At 8:59:16, the upper right corner of the scaffold suddenly sparked, and the white worker’s body suddenly stiffened
.
Then, several parts of the scaffold began to sparkle
.
The other two workers could not be seen because the car was in the way, but behind the white car, a shadow leaned back at the same time, then began to emit sparks and a lot of smoke
.
Five seconds later, the white worker fell to the ground
.
After the accident, emergency center staff and police have rushed to the scene
.
Doctors told reporters that when they arrived, the three workers had no signs of life, and the scene of the accident was still very dangerous
.
The relevant staff also dealt with the emergency power failure of Beitun section of Qianfeng road in Taiyuan
.
At present, the police are still investigating the accident further
.
Again, I would like to remind you that if you find someone getting an electric shock, you should not panic
.
First of all, you should make the person get away from the electrified body as soon as possible
.
The first-aid personnel should not directly contact the electric shock victims, so as to prevent their own electric shock from affecting the rescue work
.
There are several ways to quickly get rid of the charged body as follows: (1) switch off the power supply
.
If there is a power switch near the place of electric shock, the power supply should be cut off immediately
.
If the place of electric shock is far away from the power supply, the power line can be cut off by using insulating pliers or wooden handle sharp tools (such as axe, wooden handle knife, etc.), at this time, it should also be noted that the cut-off power line is still charged, and measures should be taken to prevent personnel from electric shock
.
(2) insulating objects are used to separate the electric shock from the power supply
.
When the above methods are not available, dry wooden sticks, bamboo poles, shoulder poles, plastic products, rubber products and leather products can be used to remove the electric shock from the power supply, or dry insulating cotton padded clothes and quilts can be used to push the electric shock away from the live equipment, so that the electric shock can be quickly separated from the power supply
.
▍ content source: Metropolitan 110 ▍ text arrangement: Metropolitan 110（
.
