Many friends are looking for companies specialized in formaldehyde removal, but do you know how the service personnel of Xi’an formaldehyde removal company remove formaldehyde? Next, let Sennott lead you to see how they work
. 
I believe you will know something after reading the article
. 
Formaldehyde testing and service providers make an appointment for testing time
. 
They will bring the original imported portable formaldehyde detector (according to them, it is the Beichuan type asp-1200 air sampler of Japan Guangming Chemical) to us for testing
.
After testing, they will read out the data from the testing tube
.
Generally, two points will be selected for detection: Children’s room and living room
.
1： Dust cloth or maintenance film shall be used to cover furniture, lamps, power sockets, switch panels, mirrors, ornaments, calligraphy and painting and other non construction surfaces
.
Green plants shall be covered or removed from the construction area when spraying
.
2： They mainly use spray gun to spray wall and ceiling
.
3： They told me that they must achieve “enough uniform, comprehensive coverage, focus on the release source, focus on the release port
.
4： Sufficient and uniform: strictly abide by the construction requirements in the process of construction to achieve sufficient use; paint evenly in the process of spraying / roll coating to ensure that the spraying parts are evenly covered without omission
.
5： Full coverage: fully cover the construction surface as far as possible, and achieve zero dead angle construction for the construction surface of water absorbing wall, roof, curtain, soft decoration, etc., to ensure no omission
.
6： Key emission source and key treatment: panel furniture is the key formaldehyde emission source
.
Carry out comprehensive construction on the back and bottom of the furniture, use cotton cloth, towel, paper, etc
.
as the carrier in the interior of the furniture (if it is smooth surface), spray quanfen formaldehyde scavenger, and then carry out treatment by hanging / tiling in the cabinet and drawer; if the interior of the furniture is a water absorbing surface, it can be carried out normal and uniform construction
.
The two methods are suitable for all furniture to reduce formaldehyde concentration
.
7： Key treatment of the release port: a large amount of formaldehyde will be emitted from the seam of the plate, the seam of the edge, and the exposed nail hole
.
Use a needle tube to inject quanfen formaldehyde scavenger at these positions, and focus on the treatment of the exposed surface of the incision as far as possible
.
After the construction, furniture return to the first place: after the construction, the furniture will be fully cleaned, and the furniture will be reset; the maintenance film will be removed and all construction items will be recycled; the indoor floor and the residual marks in the non construction position will be cleaned
.
2： Check in: after 48 hours of construction, the engineer will check in to ensure that the formaldehyde concentration is reduced to a safe range, so that you can check in without worry
.
Sunnet vision: to provide users with the most healthy breathing solutions!.
.
