Safety island is an essential part of the parking lot
. 
Many weak current friends have questions about its construction and quotation
. 
In our weak current VIP technology group, many project managers often discuss it
. 
So in this issue, let’s take a look at how to quote for the construction of parking safety island? How to construct? 1、 What is a safety island and how to do it? Safety island, as the name suggests, is for the sake of safety
. 
There are two reasons: first, to prevent the vehicle from damaging the equipment and to play a protective role
.
The second is to prevent the equipment from being installed on the ground, especially in some low-lying areas
.
Needless to say, if there is a little rain, the equipment will be flooded and eventually paralyzed
.
So what should the safety island do and what processes are needed? 1、 The proportion of cement to sand (volume ratio) should be about 1:2
.
2、 The size of the safety island is generally one in and one out, and the charging equipment should be put together, and the toll box should be placed in the middle
.
We can make the safety island into a cuboid of 5-5.5 meters long, 1.3 meters wide and 0.15 meters high
.
For the sake of beauty, we can make the two ends of the island into arc lines, as shown in the figure: before pouring the safety island, the wiring pipes should be embedded
.
The embedded line pipe shall be galvanized pipe or PVC pipe according to the wiring requirements
.
If it is a safety island on the slope: the safety island on the slope should be made into several steps, and the place where the equipment is placed should be made into 60 * 60 steps, but the upper surface of the safety island must be horizontal
.
If there is a sentry box, the place where the sentry box is installed should be made horizontal
.
As shown in the figure: 3
.
The construction of the safety island shall be carried out on the occlusive cement floor with concrete according to the specified size
.
It’s surrounded by baffles to make a regular shape
.
Do not fill with bricks or other materials where equipment needs to be installed
.
In order to avoid the pulling force of the equipment to roll the safety island
.
4、 After the safety island is dried, let the surface dry after the cement is grouted twice, then cover it with cloth or straw for maintenance, and water it at least 2-3 times in the middle
.
It’s complete
.
5、 Finally, after the installation of the equipment, the whole surface of the safety island will look beautiful and practical with paint
.
2、 How to quote for the construction of the safety island? Many friends have questions about the construction of the safety island, because the cost of construction varies from place to place
.
For example: let’s take one in one out safe construction as an example, how to quote for 5000 * 600 * 150 safety island construction? This is a standard one in one out parking safety island
.
How to calculate the price? The construction of the safety island is divided into material and labor
.
The quotation should also be based on the model of the safety island, such as 5000 * 600 * 150 specification with arc chamfer
.
How to quote? The cost of formwork and cutting is about 200 yuan, the cost of sediment is about 600-800 yuan, the cost of labor is about 800-1000 yuan, the cost of embedded pipe and auxiliary materials is about 100-200 yuan
.
In general, the lowest price of a safety island with one in and one out gate is about 2000-2500 yuan
.
Official website of weak current industry website: www.rdhyw.com Learning recommendation: VIP technical exchange group: Diani weak current scheme and quotation: Diani weak current drawing Encyclopedia: Diani.
.
