Another fatal accident! Correctly wearing safety belt and helmet during construction can protect life!

Even if you point and recite, death has no chance! Please wear your seat belt correctly after reading! 02 the importance and risk of wearing safety helmets are really everywhere

.

Tan mouming arranged the removed steel pipes alone on the floating platform on the second floor in the Southeast (4.52 meters from the ground)

.

Keep a certain distance between the top of the head and the top of the hat body

.

At about 15:30 on April 24, 2021, a falling accident occurred at the construction site of rain and sewage diversion reconstruction project at No

.

6

.

Pay attention to cleaning and protection

.

001) is issued by Guangzhou Baiyun District Water Affairs Bureau

.

1

.

Fall from heights 10

.

2

.

9

.

High altitude operation, electric shock, fall and death 3

.

Employees who work at heights do not wear safety belts, fall and die accidentally 5

.

The lower cheek strap must be fastened under the jaw, and the lower cheek strap of the helmet must be fastened under the jaw, with moderate tightness

.

In this way, it will not be blown off by strong wind, or knocked off by other obstacles, or the safety helmet will fall off due to the back and forth swing of the head

.

No one is allowed to enter the construction site without a helmet

.

At about 15:00 on the same day, the removal of the external wall scaffold was completed, and the above five personnel were scattered in different positions for later material cleaning

.

The accident investigation team, in accordance with the principles of scientific rigor, compliance with laws and regulations, seeking truth from facts and paying attention to practical results, through accident site investigation, inquiry, investigation and evidence collection, comprehensive analysis, found out the process and causes of the accident, identified the nature and responsibility of the accident, and put forward suggestions on the handling of relevant responsible persons and responsible units and suggestions on accident prevention and rectification measures

.

Do not open holes casually for ventilation

.

▲ pay attention to the construction management of Guangdong Province and obtain the latest construction policies of the province ▼ pay attention to the construction management and obtain the latest national construction policies

.

Name of the project involved: diversion transformation of rainwater and sewage drainage system in the park of the headquarters of Guangdong Academy of metrology, building exterior wall waterproofing and maintenance of relevant supporting facilities; Project location: No

.

1、 Basic information (I) basic information of the project involved

.

Luck is tantamount to death! If you don’t believe it, continue to look down ↓↓↓ you didn’t wear a safety helmet and were killed by a cement column

.

On December 21, 2020, Guangdong Academy of Metrology signed a construction project construction contract with Hongda Company, defined their respective safety production management responsibilities, and signed a construction project supervision entrustment contract with Hongye Jinji supervision company

.

If it is lost or damaged, it must be reissued or replaced immediately

.

On March 17, 2021, Wu Pengjun, the actual person in charge of the project assigned by Hongda Company, contracted Tan Mingyi the scaffold erection and demolition project in the project, and the two sides signed the construction outer frame project contract( 2) Basic information of units and personnel involved.

.

You didn’t wear a safety helmet during construction and were hit on the head by a falling hopper car! If you didn’t wear a helmet, did your head melt directly? Steel plate unhooked, hit the head directly, helmet, help! Caught off guard, fell down and hit the iron bar directly on the worker’s head! Shoulder to shoulder with the God of death

.

Lack of safety awareness 9

.

The direct cause is that the operators have weak safety awareness, work at risk and do not wear labor protection articles as required

.

Recently, Guangzhou Baiyun District People’s government issued an investigation report on the accident

. Plastic Nail Plate

In addition to installing a hat lining inside the helmet body, some also open small holes for ventilation

.

Danger 8

.

After investigation, it is determined that the “4.24” High-altitude Falling Accident in Jingtai street, Baiyun District, Guangzhou is a production safety responsibility accident

.

Any hard hat with heavy blow and crack, whether damaged or not, shall be scrapped

.

According to the relevant provisions of the regulations on reporting, investigation and handling of production safety accidents (Order No

.

Because the tightness of the buffer pad is adjusted by the belt, the vertical distance between the top of the head and the top of the hat body is generally 25mm ~ 50mm, at least 32mm

.

The project does not involve the change of building structure, and the consultation opinions on design conditions of drainage facilities in Guangzhou (SUI Yun Shui Wei Guan Pai Zhi Zi [2021] No

.

30, Songbai East Street, Jingtai street, Baiyun District; Project content: reconstruction of rainwater and sewage drainage system in the park, waterproof maintenance of office building enclosure, etc

.

3

.

When in use, do not open holes for ventilation, because doing so will reduce the strength of the cap body

.

In this way, it will not be blown off by strong wind, or knocked off by other obstacles, or the safety helmet will fall off due to the back and forth swing of the head

.

They do not wear safety belts, unfortunately fall 6

.

The correct use of safety belt is attached with the original text: investigation report on the general accident of “4.24” falling from height in Jingtai street, Baiyun District, Guangzhou

.

At about 19:00 on the same day, Tan mouming died due to traumatic brain injury

.

They feel fine, but they may not have an accident! The last one, the safety measures are in place

.

Tan mouming worked at a height of 4.52 meters from the ground, failed to wear safety belts and safety helmets correctly in accordance with table 3a14 of the code for the selection of personal protective equipment (GB / t11651-2008), violated Article 54 of the work safety law of the people’s Republic of China, resulting in the failure to obtain any effective safety protection, which was the direct cause of the accident

.

5

.

All hard hit helmets shall be scrapped because they will be gradually damaged during use

.

Project owner: Guangdong Academy of metrology; General contractor of project construction: Sichuan Hongda Construction Engineering Co., Ltd

.

If abnormal phenomena are found, they shall be replaced immediately and shall not be used again

.

On that day, Hongda Company entered the construction site

.

30 Songbai East Street, Jingtai street, Baiyun District, resulting in one death

.

(hereinafter referred to as Hongda Company); Project supervision unit: Guangzhou Hongye Jinji Construction Supervision Consulting Co., Ltd

.

493 of the State Council), with the approval of the district government, the District Emergency Management Bureau shall take the lead to organize the district public security branch, the district housing construction and Transportation Bureau, the District Federation of trade unions Relevant personnel of Jingtai sub district office and other units set up the “4.24” general accident investigation team of falling from height in Jingtai street, Baiyun District, Guangzhou (hereinafter referred to as the accident investigation team) to investigate the accident

.

The importance of wearing a helmet ▼ combat damage is everywhere

.

Please pay attention to safety at work! Wear safety helmet ~ precautions for wearing safety helmet 1

.

4

.

Unstable scaffold, lose one’s life 4

.

30 Songbai East Street, Jingtai street, Baiyun District, killing one person

.

They do not grasp one firmly 7

.

Therefore, regular inspection shall be conducted to check whether there are cracks, depressions, cracks and wear

.

The lower cheek strap must be fastened under the jaw, and the lower cheek strap of the helmet must be fastened under the jaw, with appropriate tightness

.

Safety helmet shall also be worn for indoor operation, especially for indoor live line operation, because the safety helmet can not only prevent collision, but also play an insulating role

.

If you are not careful, you will be in the abyss! 2

.

(hereinafter referred to as Hongye Jinji supervision company)

.

It is strictly prohibited to use the safety helmet with only the lower jaw belt connected with the helmet shell, that is, the safety helmet without buffer layer in the helmet

.

After the accident, at about 7:00 on April 24, 2021, Tan mouming and other five operators began to dismantle the external wall scaffold

.

7

.

In this way, it can be ensured that when subjected to impact, the cap body has enough space for cushioning, which is also conducive to the ventilation between the head and the cap body at ordinary times

.

Source: at about 15:30 on April 24, 2021, the people’s Government of Baiyun District, Guangzhou City, a high-altitude falling accident occurred at the construction site of rain and sewage diversion reconstruction project at No

.

Lack of awareness of risks 11

.

Don’t get lucky! There is only one life, please don’t challenge your luck index

.

8

.

At about 15:30, Tan mouming was out of balance, fell from the edge of the platform and landed on his head, causing traumatic brain injury

.

Too many accidents prove that correctly wearing safety belts and helmets on construction sites can protect life! 01 importance of wearing safety belt as long as you work at heights, you must wear safety belt correctly! The following dynamic diagram is given to employees who do not want to wear seat belts

.

When using a helmet at ordinary times, keep it clean, do not touch the fire source, do not paint arbitrarily, and do not sit on a stool to prevent loss

.