Do not open holes casually for ventilation.
In this way, it will not be blown off by strong wind, or knocked off by other obstacles, or the safety helmet will fall off due to the back and forth swing of the head.
For your life safety, please wear and use labor protection articles correctly! Risk is everywhere, luck is equal to death! A worker of Jiangxi Jinye big copper Technology Co., Ltd., Guangxin District, Shangrao City, suffered from a sudden rupture of the hydraulic oil pipe of the forklift during the maintenance of the forklift, resulting in a natural drop of the fork knife and hitting the back of the mechanic’s head, resulting in brain bleeding, fainted on the scene, and died after being sent to the hospital for treatment.
Article 102 of the new production safety law stipulates that if the production and business operation entity fails to take measures to eliminate the hidden danger of the accident, it shall be ordered to eliminate it immediately or within a time limit and be fined not more than 50000 yuan; If the production and business operation entity refuses to carry out the implementation, it shall be ordered to stop production and business for rectification, and the persons directly in charge and other persons directly responsible shall be fined not less than 50000 yuan but not more than 100000 yuan; If a crime is constituted, criminal responsibility shall be investigated in accordance with the relevant provisions of the criminal law.
If the act of wearing a safety helmet without wearing a chin strap is found in the supervision and inspection, it may be ordered to eliminate the hidden danger immediately or within a time limit and be fined.
Accident case 3: Recently, Mianyang Safety Supervision Bureau released the investigation report of “6.4” general fall injury accident of Sichuan qiangen Construction Engineering Co., Ltd., which resulted in one death and direct economic loss of about RMB 1.2 million.
Zhou Xianzhong didn’t take safety protection measures, wear safety helmet and belt, and have no safety belt during the climbing of scaffold.
If the employer fails to provide labor protection articles as required, it shall bear legal responsibility! Take a look at a punishment case.
He died the next day.
Direct cause of death: the employee accidentally fell down when using the single row mobile scaffold and did not wear the safety helmet correctly, resulting in the falling off of the safety helmet, head landing injury and death.
2.
(male, 45 years old, Sangzhi County of Hunan province) received the notification from Xu Linlin, the operator of the central control room, and went to the third floor of the 1# emulsion adhesive workshop to wash the kettle on the 22# reactor.
3.
All hard hit helmets shall be scrapped because they will be gradually damaged during use..
Please don’t challenge your luck index.
Precautions for wearing safety helmets 1.
The reason is wearing a hard hat but not wearing a hat belt! The experiment proves that the safety helmet is not worn, the safety helmet is directly burst, the jaw belt is not fastened, the melon hat is separated and the watermelon is broken.
Accident case 2: on April 13, 2020, a high-altitude falling accident occurred during the waterproof construction of the outer wall of Changshu Youxin industrial square by the erliwan municipal engineering team of Bixi new area, Changshu (the accident occurred in the economic and Technological Development Zone), resulting in one death.
Zhou Xianzhong died after ineffective rescue.
If you don’t want to miss the highlight of this official account, please put the public number of construction technology as the star sign and click “collect”, “look at” and “Zan” at the end of the text, so that each new article will appear in the subscription list at the first time.
Cleaning method: the operator stands on the operation platform of the reactor and uses the air pump to connect the high-pressure water pipe to flush the inner wall of the reactor from the manhole.
In this way, it can be ensured that when subjected to impact, the cap body has enough space for cushioning, which is also conducive to the ventilation between the head and the cap body at ordinary times.
The erection of the upper and lower passages of the scaffold is not standardized, the pedestrian passage is not set, and the spacing between the rungs of the ladder is too large; 2.
In this way, it will not be blown off by strong wind, or knocked off by other obstacles, or the safety helmet will fall off due to the back and forth swing of the head.
NOCITCE changed the push rule because of WeChat official account.
Because the tightness of the buffer pad is adjusted by the belt, the vertical distance between the top of the head and the top of the helmet body is generally 25mm ~ 50mm, at least 32mm.
The safety helmet is correctly worn and intact.
After investigation, 8 workers were temporarily employed, but the company did not provide them with labor protection articles such as safety helmets and gloves as required.
Direct cause: the worker didn’t wear a helmet correctly and fell from the manhole of the reactor to the bottom of the reactor during the reactor washing operation.
Punishment result: the hoisting company was fined 40000 yuan for its illegal act of failing to provide employees with labor protection articles that meet national or industrial standards.
There is only one life.
Direct causes: 1.
The lower cheek strap must be fastened under the jaw, and the lower cheek strap of the helmet must be fastened under the jaw, with appropriate tightness.
Article 99 of the new production safety law If a production and business operation entity commits any of the following acts, it shall be ordered to make corrections within a time limit and may be fined not more than 50000 yuan; If it fails to make corrections within the time limit, it shall be fined not less than 50000 yuan but not more than 200000 yuan, and the persons directly in charge and other persons directly responsible shall be fined not less than 10000 yuan but not more than 20000 yuan; If the circumstances are serious, it shall be ordered to stop production or business for rectification; If a crime is constituted, criminal responsibility shall be investigated in accordance with the relevant provisions of the criminal law: (4) failing to provide employees with labor protection articles that meet national or industrial standards; If you don’t wear a helmet, you don’t wear a helmet! Accident case 1: on November 30, 2020, a falling accident occurred in Changshu badfu Technology Co., Ltd.
At about 8:20 a.m., Zhou Xianzhong accidentally dropped the ink bucket to the ground and picked it up when he used the ink bucket to snap the line on the outer wall scaffold.
Wearing safety helmets correctly can protect your life! The lifting rope is broken, and the safety helmet life-saving steel plate is directly patted on the worker’s head.
The lower cheek strap must be fastened under the jaw, and the lower cheek strap of the helmet must be fastened under the jaw, with moderate tightness.
The new production safety law came into force on September 1, which stipulates that “production and business operation entities must provide employees with labor protection articles that meet national or industrial standards, and supervise and educate employees to wear and use them in accordance with the use rules”; According to the national standard helmet, the product description must state that “in order to give full play to the protective force, the helmet hoop must be adjusted according to the size of the head circumference and the chin strap must be fastened”.
Star setting: enter the official account home page, click on the top right corner, click “set star”, and yellow star will appear next to the official account name (Android and iOS user operation is the same).
In addition to installing a hat lining inside the helmet body, some also open small holes for ventilation.
In the process of counting many accidents, it is found that in many fatal accidents, the victims wore safety helmets, but were still hit by objects or hit the ground with their heads.
At about 6:45 on April 13, 2020, Zhou Xianzhong and Wu Tingyin, the constructors of erliwan municipal engineering team in Bixi new area, Changshu, arrived at Youxin industrial workshop in Changshu and began to repair the outer wall of the 12# plant.
At about 23:50, Wang Xianwei, the operator of the production department, found Xiang Shanghua lying at the bottom of the 22# reaction tank and bleeding from a wound on his head.
When in use, do not open holes for ventilation, because doing so will reduce the strength of the cap body.
Around 23:30 in the evening of November 30, 2020, Xiang Shanghua, operator of production department of Changshu bard Fu Technology Co., Ltd.
The safety helmet is directly patted and broken.
Keep a certain distance between the top of the head and the top of the helmet body.
Please pay attention to safety at work! Wear safety helmets.
If you wear a helmet and wear a chin strap, the above three accidents may not cause death.
The case is introduced: when a hoisting company in Hangzhou carried out hoisting operation in the workshop, 8 employees did not wear labor protection articles such as safety helmets.
//Wechat public account setting prompt/// The official account is official.
(located in the Economic Development Zone), resulting in one death.
4.
The accident could have been avoided if you had worn a helmet! Accidents always happen at an accidental moment.
At about 8:30, Zhou Xianzhong fell to the ground (about 8m high) while climbing the scaffold with an ink bucket in his hand and was seriously injured.
5.
