Concealed pipelines of outdoor equipment (pipelines from weak current wells to end equipment, including earthwork excavation, backfilling, compaction, etc.), various cables and related equipment (except the equipment supplied by Party A), support, equipment foundation, etc.
Including safety island, toll booth, distance card reader, expressway gate Railing (fence or straight pole), vehicle management controller, vehicle identification camera, spotlight, parking management / charging software, cable, optical cable, switch, license plate identification camera and other equipment that meet the functional needs of the system, and be responsible for the overall function of the system.
2.
Intelligent subsystem works: 1.
Parking lot management system: responsible for all work of the parking lot management system of the whole project.
Provide temporary power supply for construction, processing site and warehouse land (in the construction site); the general contractor shall cooperate with the commissioning and completion acceptance of the intelligent project.
4.
supply, installation, commissioning, handover and warranty.
How to define our working interface? At this time, the owner will ask us to provide an intelligent interface description or form to explain our work content in detail.
6.
Weak current bridge, hole plugging through weak current shaft and weak current box of household unit shall be constructed by the general contractor; The general contractor shall be responsible for the laying of grounding grid and grounding trunk line, the supply and installation of general equipotential box and sub equipotential box, and provide independent terminals and grounding points for intelligent system.
Contract the following works of the project, including but not limited to TV monitoring system, intrusion alarm system, entrance and exit control and electronic patrol system, equipment management system, UPS power supply system Machine room engineering, background music system (if any), visual intercom system, elevator five party communication system, wireless intercom system (if any), generic cabling system, etc.
Contents of the general contracting project: 1.
Carry out all construction contents according to the reviewed and improved drawings, and recheck the installation of pipelines and equipment according to the intelligent comprehensive drawings; If there is any data, it must be connected to the local public safety system to cooperate with relevant inspection and review; Ensure to pass the project acceptance organized by the competent department; After acceptance, it shall be connected to the property management system platform in accordance with the property requirements.
1、 Be responsible for all weak current disciplines of the project (including other cable TV projects, telecommunications projects and mobile phone signal coverage projects not within the scope of the contract) deepen the audit work and generally coordinate the on-site work of all weak current disciplines.
5.
2.
6.
all equipment supply, installation, commissioning, acceptance, handover, warranty and other work that meet the functional needs of the system, and be responsible for the overall function of the system.
Before the construction of the main structure, the construction unit of the intelligent project has not been determined, and the general contracting unit is responsible for embedding the electrical casing and the casing through the outer wall, embedding and plugging, secondary piping and slotting repair according to the construction drawings of the intelligent building project in the construction stage of the main structure.
Access control and electronic Patrol System: be responsible for all work of the access control and electronic Patrol System of the whole project, including card reader, door button, electromagnetic lock, access control controller, patrol card reader, management software, cable, optical cable and switch And all equipment supply, installation, commissioning, acceptance, handover and warranty that meet the functional needs of the system, and be responsible for the overall function of the system.
2.
Including Supply, installation and commissioning of all equipment meeting the functional requirements of the system, such as camera, camera installation pole or support, camera pole or support foundation, camera lightning protection, camera power supply, power line, video line or network cable, optical cable, optical transceiver, switch, hard disk video recorder or NVR, matrix, TV wall, console, monitor, video distributor, etc Be responsible for the overall function of the system in terms of acceptance (including the acceptance of possible government authorities), handover and warranty.
Equipment management system: responsible for all work of the equipment management system of the whole project.
5.
3.
4.
3.
Foreword weak current projects often need to deal with various specialties, because the working face of intelligent specialty is too broad.
Including DDC control box, DDC controller, DDC module, sensor, open piping, network device, management software, various interfaces, etc.
Relevant contents of the intelligent lighting project.
UPS power supply system: responsible for the self use of weak current project Supply, installation and commissioning of power distribution system..
3.
4、 The general contractor shall be responsible for the equipment foundation (the intelligent professional contractor shall provide the size of the equipment foundation, the location of reserved bolt holes, and be responsible for foundation damping, secondary grouting, etc.).
Supply and installation of all branch control boxes except the intelligent unit distribution box, and supply and installation of cables and wires from the box to the equipment and points.
5.
Be responsible for the installation of electrostatic floor, air conditioner, dust treatment, lightning protection, grounding, bridge supply and installation in the fire control room.
Contents of the intelligent project: be responsible for the docking with the four operators, track the transfer points of the four operators to the machine room on the first floor of the underground of the project, follow up the coordination, review and deepen the drawings before construction, and correct the unreasonable or missing parts of the drawings Improve.
Intrusion alarm system: be responsible for all the work of the intrusion alarm system of the whole project, including various detectors, alarm keyboards, multi defense modules and fire locks (electromagnetic lock), alarm host, alarm management software, keyboard, optical transceiver and other equipment that meet the functional needs of the system shall be supplied, installed, debugged and accepted (including the acceptance of possible government administrative agencies), handover, warranty and other work, and be responsible for the overall function of the system.
If you don’t have it, you can see this ready-made.
Video monitoring system: responsible for all work of the TV monitoring system of the whole project.
Indoor open piping (or concealed pipes included in the scope of the drawing), metal hoses, various cables Supply, installation, commissioning, handover and warranty of relevant equipment (except the equipment provided by Party A), supports and hangers, etc.
