Generally, the integrated wall is installed from the top during the installation process.
Bend as straight as possible., After bending, the connection points shall be bonded as much as possible.
What are the construction steps and precautions of integrated wall? 1.
During the bending process, the bending line must include the wall thickness.
In the process of cutting plates, make sure that the material section is straight and free of burrs.
There are enough points for fixing the integrated wall; The straightness of timbers shall be ensured at the extreme edge; Try to make the dimensions on both sides of the right angle consistent; The structure is relatively firm.
The higher the cutting saw speed, the less burrs.
6.
3.
During the bending process, pay attention to draw the bending line first, and then take the polyurethane material, which is generally about 8mm.
Install the integrated wall.
After the wooden structure is completed, the actual wiring shall be carried out, and the electrical wiring port shall be reserved.
5.
It can be said that people can hardly cope with the speed of product upgrading.
What is the material from environmental protection integrated wall to the bottom? What are the construction steps and precautions? I.
There are a variety of wall decoration materials, from simple lime painting to emulsion paint, to wallpaper and liquid wallpaper.
Through the introduction of Xiaobian, I believe you have a general understanding of what the material of environmentally friendly integrated wall is and what the construction steps and precautions are.
If there is concave convex on the wall, it must be leveled with a level and installed with woodworking strips.
4.
The measured size must be within 2mm, otherwise the joint will be very irregular.
it can be used around the wall and on the top of the wall.
At the same time, the environmental protection integrated material is suitable for direct installation with the blank wall, and can be applied to the living room, bedroom, kitchen, toilet, partition, sunshine room, etc.
Water pipe layout and floor installation.
II.
what is the integrated wall material? The integrated wall material is a new type of integrated wall made of bamboo, wood fiber, polymer waterproof and fireproof materials and crystal powder pressed at high temperature.
Wooden structure of top light return belt and background wall: wooden structure shall be made according to the design requirements, and precautions shall be taken during operation.
When there is deviation between the top and bottom of the wall surface, it shall be effectively repaired by integrating the wall surface, with the least part as the bending part, and the wooden strip shall be used for fulcrum paving to achieve consistency between the top and bottom, and then the wall surface shall be integrated.
The emergence of environmental protection integrated wall has attracted the attention of consumers.
Integrate the wall installation processing details.
Treatment method for uneven wall surface.
7.
It is an integrated wall decoration material with many elements, such as thermal insulation, sound insulation, heat insulation, moisture-proof, fire prevention, easy installation, easy modeling, high anti hanging and wiping, high green environmental protection, 3D art fashion and so on.
2.
are used during the installation, the line installation line shall be integrated into the wall.
Some friends may be relatively unfamiliar with the word integrated wall.
For the installation of wall and background wall, if internal corner line, foundation line, waist line, door sleeve line, window sleeve line, etc.
I hope Xiaobian’s introduction can be helpful to you…
