Otherwise, rework will happen sooner or later.
Therefore, whether the beautiful joint is done well depends on the completion effect, and we should pay more attention to the construction process and quality.
If these two conditions are met at the same time, it can ensure that the adhesion between the beautiful seam and the ceramic tile can be integrated, not easy to collapse, durable and waterproof.
In order to finish and settle accounts on time, many seamers will do it directly.
Second question: why can’t the beautiful joint construction in the bathroom be done together with the living room? As shown in the figure, this is the scene before the construction of a beautiful joint by an owner.
The joint cleaning process standard is that the joint depth is more than 3mm, the brick mouth is free of black edge, and the brick side is clean and dust-free).
Fourth, after sewing, wait until it is completely dry and touch the water in a week.
So how to do the beautiful seam in the bathroom and the waterproof effect is the best? Just follow the two details mentioned above.
Can you do beautiful sewing on this scene? The gap is full of dust and moisture, and the dirt on the ceramic tile surface in some areas has hardened.
So how should our owners avoid these problems? They should be aware of them before decoration.
When the decoration is about to be completed, the ground gap of the bathroom is basically out of shape.
Some of the reasons for these problems are the quality of the materials themselves.
If you want to achieve the best quality of beautiful joints, the kitchen and bathroom areas can be constructed early, and the living room and balcony can be removed after decoration.
The joint is not clean, the side of the brick is not clean, and the joint beautifying agent cannot be firmly adhered.
Answer the above three questions: the first question: can the beautiful seam in the bathroom be waterproof? How to make the most waterproof? It is certain that the beautiful seam can be waterproof, but the beautiful seam can only serve as the auxiliary waterproof of the toilet.
With the continuous updating of the industry, at present, the toilet floor has begun to popularize a new type of beautiful joint that is not easy to fall off, epoxy colored sand.
In actual construction, there are a lot of such dirty and wet construction sites, and the waiting time for gap drying is long.
If the toilet leaks, the main reason is still at the source, that is, below the ceramic tile surface, either the drainage pipe in the caisson leaks or the waterproof layer leaks.
At this time, the brick joints were clean and there was no water in the joints.
At this time, if the beautiful seam is forced, it will fall off automatically after a few months.
The owner needs to know: can the beautiful seam of the toilet be waterproof? How to make the most waterproof? Why can’t the beautiful joint construction in the bathroom be done together with the living room? What should we pay attention to in the beauty seam of the toilet? Why is the bathroom beautiful seam the “hardest hit area” of construction? Why does the bathroom beautiful seam fall out in a few months? The main reason is that during toilet decoration, most construction sites are soaked in water for a long time, caisson ponding is serious, the gap is not protected, mud, sand and sundries, resulting in unclean and dry brick joints.
Epoxy colored sand belongs to joint filling construction.
When the bricks have just been pasted, the brick joints are clean and dry (the picture effect is that professional cleaning has been done, tools: vacuum cleaner, joint cleaning blade, electric joint cleaning machine, black edge sand block and towel.
After the bricklayer pasted the tiles, the bathroom was very clean within a week before the next project entered the site.
The above is what we need to know and pay attention to the beautiful seams in the bathroom.
A one touch explanation will be carried out in the later stage.
The construction method is different from the beautiful joint of pressing material.
Another is whether the decoration personnel are professional or not, and whether the construction process and technology are standardized.
Water is required for carpentry and painting, The master also needs water to go to the bathroom during the decoration.
The beautiful joint plays a waterproof role on the surface of the ceramic tile to prevent the open water in the toilet from flowing into the gap and penetrating into the cement base under the ceramic tile.
The third question: what aspects should be paid attention to in the construction of beautiful joints in toilets? 1、 The internal corners around the toilet floor should be sewn as deep as possible, which is conducive to the beauty sealant to grasp the floor and prevent it from falling off in the later stage.
In the link of home decoration, many problems appear only after a certain period of time.
However, even so, the quality of the beautiful joints made in this case will be discounted, because the cement base layer is difficult to completely dry due to the long-term immersion under the ceramic tiles, and the cleanliness of the ceramic tile joints and inner walls is difficult to clean up to that when the tiles are just pasted.
We can only clean the sanitation thoroughly, then deal with the gap, wait for many days, dry the gap, and then beautiful sewing.
2、 The gap in the toilet shall be filled as far as possible, deep and stronger.
5、 Most importantly, if the gap fails to meet the construction premise standard, the construction must be suspended.
3、 The beauty seam in the toilet shall be constructed before installing cabinets and pendants, so as to avoid that the construction can not be carried out in the sheltered area in the later stage.
At this time, it was the best environmental period for beautiful joint construction.
First, make a beautiful seam when the seam is dry.
Above is the ending state of most home decoration.
Therefore, the choice of construction time is very important if there is no problem after the beautiful joint of the toilet.
I hope the owners who have not been decorated can see it.
For example, ceramic tile hollowing, toilet water seepage, beautiful seam falling off, etc.
Second, the inner wall of the seam must be cleaned.
Do your homework in advance…
Obviously, the gap is not clean and wet, which is not conducive to beautiful sewing.
Once the decoration is finished and there is a problem again, it will be very annoying to rework and repair.
In this way, the good seaming is doomed to be used for a long time and easy to fall off.
Cleaning the gap} has been cleaned and ready for loading.
6、 It is recommended to use a new type of beautiful seam and epoxy colored sand, which has strong adhesion and excellent waterproof performance.
The joint is wet, the joint is wet, too much moisture will lead to abnormal curing of the sealant, and the hardness and wettability will decrease.
