Mix the breathable surface spray glue, EPDM rubber particles and EPDM rubber powder according to the specified proportion, mix them evenly, pour them into the special spraying machine, and spray them two to three times in clockwise and counterclockwise directions.
Professional construction machinery is applied to shorten the construction time.
It has the advantages of long service life, moderate comprehensive performance and fast construction.
Silicon Pu course materials are a new generation of course pavement materials developed on the basis of PU (plastic) course materials, which effectively solves the shortcomings of Pu course materials in performance, environmental protection construction, service life and daily maintenance, During construction, silicon Pu stadium materials also have their own special process: 1 Before the laying of silicon Pu stadium materials, the foundation of the construction stadium shall be cleaned and treated to ensure that the construction site is clean and free of pollution.
The data of physical and mechanical properties provided by users and relevant testing departments are implemented with reference to the enterprise standard.
After the special marking paint is fully mixed, brush it evenly between the two textured papers with a brush, and tear off the textured paper after it is dry.
Hubei Youzheng sports welcomes you to call 18971153177.
The above is the sharing of the construction process of silicon Pu stadium materials brought by the staff of Youzheng sports.
2.
3.
4.
It is the most economical and cheap, and there will be no bubble phenomenon.
Strong weather resistance: the special rubber particle surface can resist the pollution of ultraviolet ozone, sulfite and gas and prolong the service life.
During the inspection and testing of relevant national acceptance departments, the acceptance shall be carried out with reference to the relevant standards of IAAF.
Before the primer is cured, mix the single component glue and rubber particles according to the specified proportion, fully mix them with a mixer, transport them to the paving place, and pave with a paver according to the specified thickness; After curing, it becomes an elastic layer.
High cost performance: no particles on the surface, easy maintenance and saving management costs.
all over the country.
If you like this article, you are welcome to read, forward and share this article, so that friends in need can see this article! More professional knowledge of sports ground related industries such as plastic runway, waterborne silicon Pu stadium, acrylic stadium and artificial lawn can be exchanged with us! ▼ scan the following wechat remarks of manager Wu: plastic runway, stadium materials, quotation, bidding, materials, design and construction manager Wu welcomes the consultation of 18971153177 plastic runway_ New national standard plastic runway_ Breathable plastic runway_ Silicon Pu Stadium_ Acrylic Stadium – a manufacturer of artificial turf materials, production, sales, construction and R & D.
Lay elastic layer and reinforcing layer.
III Construction principle of breathable plastic runway # cement concrete or asphalt concrete surface cleaning → dilute acid water to clean cement concrete or asphalt concrete surface → clean cement concrete or asphalt concrete surface again with clean water → measure and draw the bottom line → Pu strong glue to apply cement concrete or asphalt concrete surface → laying Find the track of the paver → pave the bottom layer of rubber particles → spray glue on the EPDM plastic surface course → measure and draw the line → clean the surface course.
The surface shall be flat and smooth after laying.
2.
It can be used after rain to improve the utilization rate.
It is not allowed to use alpine ice and snow areas.
Generally, it needs to be laid two or three times, or it can be made into a smooth surface.
Fast construction: due to the use of special materials, the construction does not have high requirements for the weather.
4.
Construction steps of breathable plastic runway 1.
Proper elasticity: porous molding material with moderate elasticity and rebound to reduce sports injury.
II Application scope of breathable plastic runway materials: it is applicable to universities, primary and secondary schools, troops, military regions, enterprises, etc.
Breathable plastic runway product introduction 1 Breathable plastic runway material product features: 1 All weather: maintain a high level of quality in any season and temperature difference.
Lay wear-resistant surface course.
Mark the position of the line with the canvas line, and then paste it on the court with textured paper along the canvas line.
Add solvent to the silicon Pu stadium material to prepare the construction consistency, and lay it on the base surface with flat scraper or tooth scraper until it is laid to the required thickness.
3.
2.
The climatic conditions are above – 16 degrees.
Apply one-component glue or primer evenly on the cement foundation with a roller brush.
At the same time, it also reduces the investment of foundation funds.
Scribe.
5.
The silicon Pu course material shall be fully mixed and stirred according to the proportion of special sand, and laid on the reinforcing layer.
3.
For more details, please visit the official website of Hubei Youzheng Sports: http://www.cnpaodao.com/ Introduction to Youzheng sports products breathable plastic runway material breathable plastic runway material category: plastic runway material breathable plastic runway material is a high-performance plastic structure composed of rubber particles as the bottom layer and polyurethane particles and plastic slurry as the surface layer.
I hope it will be helpful to you! Construction process service hotline of silicon Pu stadium material: 18971153177 Hubei Youzheng sports plastic runway stadium material Wu Xinlong (wechat same number) sports ground material manufacturer.
After curing, it is an anti-skid and wear-resistant layer, and the commonly used colors are red and green.
Construction process of silicon Pu course materials Youzheng sports 18971153177 plastic track course materials production and sales + supporting professional construction.
There is no national standard for breathable plastic runway.
It is a sports ground recognized by the IAAF..
Mixed plastic runway material mixed plastic runway material category: mixed plastic runway mixed plastic runway material is a high-performance plastic structure composed of full Pu doped rubber particles as the bottom layer and polyurethane particles and plastic slurry as the surface layer.
