Before construction, reasonable layout and detailed design shall be carried out for the exterior wall.
At present, the studio’s exterior wall deepening design team currently has 1 design director and 10 team members, specializing in deepening and optimizing the design of various exterior wall insulation interface construction drawings / as built drawings, EPS line deepening cutting drawings, exterior wall coating division and joint design, exterior wall stone aluminum plate curtain wall deepening design, exterior wall coating interface deepening construction drawings / as built drawings, exterior wall facade control effect drawings, etc.
The insulation systems involved include rock wool board / strip, XPS extruded board, EPS expanded polystyrene board, foamed ceramic board, cement foamed board, inorganic insulation mortar, molded polystyrene board, insulation and decoration integrated board and other exterior wall insulation systems, The coating types involved include smooth / rough water in water color stone coating, real stone paint coating, elastic coating, flat coating, texture sand scraping coating, etc.
The seventh step is to tear off the protective film on the surface of the integrated board after the completion of the protective film.
Experienced workers should be selected to apply sealant on site.
It is believed that in the near future, most of the whole exterior wall thermal insulation decoration market will be replaced by integrated board.
The bonding rate of more than 60% shall be ensured, and there shall be no less than 2 fastener anchor points on each side of each plate.
In the sixth step, sponge strips with a diameter 2 mm larger than the seam width are embedded into the plate seam at a depth of 10 ~ 20 mm.
The chief designer of exterior wall has 1 million square meters of construction experience and more than 10 million square meters of deepening design experience in exterior wall insulation / coating engineering, covering foreign houses, villas, high-rise and other projects.
Because the integrated board is a closed system, if the internal water vapor is not discharged in time, it is easy to condense and affect the energy-saving quality of the outer wall, so it is necessary to install the exhaust valve in scattered arrangement.
The whole painting process shall be carried out at least twice.
The deepened exterior wall drawings can greatly improve the convenience and accuracy of budget and the accuracy of construction.
For specific design requirements and process, please consult the following design director (long press the QR code below to scan and wechat) (wechat account ximingsheji)..
The construction of exterior wall insulation and decoration integrated board is convenient, efficient and beautiful.
The precise plate cutting, side slotting, numbering, classification and stacking shall be carried out on site.
Ensure convenient construction, utilization rate of plates and beautiful appearance.
The integrated thermal insulation and decoration board has high requirements for the flatness of the base course, so the flatness of the plastering mortar shall be strictly controlled.
Original: what is the function and significance of the deepening design of exterior wall — the detailed design of EPS line coating real stone paint water in water sand drawing of building thermal insulation decoration project, the division and joint effect drawing, the construction as built drawing, how to deepen the design of exterior wall thermal insulation line coating stone curtain wall project, and the cost process is here! Taobao platform announced – Xinming design studio today, let’s demonstrate the installation and construction process of building exterior wall insulation and decoration integrated board.
The seventh step is to apply sealant, which is very important for the final effect of the external wall.
The deepening of exterior wall decoration lines, coatings and stones is becoming more and more essential.
If you need to deepen, please scan the QR code below and contact the studio engineer wechat.
Xinming design studio is based in Henan Province.
Step 5 paste and anchor the thermal insulation decorative integrated board.
Step 3 typesetting and setting out.
The second step is to paint mortar.
With the continuous development and progress of social economy, buildings increasingly pursue external aesthetics, which requires complex exterior wall decoration.
The first step is to clean the base course, chisel the uneven parts of the outer wall that affect the bonding force, and spray water for cleaning before painting.
The eighth step is to install the exhaust valve.
Step 4 install the bracket, which can be galvanized angle steel bracket or aluminum alloy bracket.
Spare no effort to escort the construction unit for accurate construction and cost saving! If you need to deeply design the stone line coating of exterior wall thermal insulation curtain wall, please contact the studio engineer.
At this step, the whole exterior wall insulation and decoration system will be completed.
According to the drawing and the actual size of the site, the hanging line and setting out shall be carried out, and the plate size shall be adjusted after the actual measurement.
