There are two reasons for this: first, to prevent the vehicle from damaging the equipment and play a protective role.
How to calculate the quotation? The construction of the safety island is divided into materials and labor.
The quotation also depends on the model of the safety island, such as 5000*600*150 specification with arc chamfer.
Needless to say, the flood is overwhelming.
If it is a safety island on the slope: the safety island on the slope should be made into several steps, and the place where the equipment is placed should be made into 60*60 steps, but the surface of the safety island must be horizontal.
In this issue, let’s see how to quote for the construction of parking lot safety island? How to construct? 1、 What is a safety island and how to do it? Safety island, as the name suggests, is for safety.
A little rain will cause the equipment to be flooded and finally lead to equipment paralysis.
How about the quotation for the construction of 5000*600*150 safety island? This is a standard one in one out parking lot safety island.
As shown in the figure: III.
4、 After the cool dry safety island is finished, after the cement is grouted twice, let the surface dry, and then cover it with cloth or straw for maintenance, watering at least 2-3 times in the middle.
In order to be beautiful, we can make the two ends of the island into an arc, as shown in the figure: before pouring the safety island, the wiring pipe should be embedded first.
Is complete.
2、 The size of the safety island is generally one in and one out of the charging equipment together, and the toll booth should be placed in the middle.
We can make the safety island a cuboid with a length of 5-5.5 meters, a width of 1.3 meters and a height of 0.15 meters.
Second: prevent the equipment from being installed on the ground, especially in some low-lying areas.
Surrounded by baffles, make a regular shape.
2、 How to make a quotation for a safety island? Many friends have questions about the quotation for the construction of a safety island, because the cost of construction varies from place to place.
For example: we will take the safe construction of one in one out as an example.
5、 At the end of the construction, after the installation of the equipment, paint the safety island, and the whole surface will look beautiful and practical.
Learning recommendation: VIP technical exchange group: click me weak current scheme and quotation: click me weak current drawings: click me..
So how to do the safety island and what processes are needed? 1、 Material preparation: national standard 425# Portland cement and medium sand.
If there is a sentry box, the place where the sentry box is installed should be made horizontal.
In our weak current VIP technology group, many project managers often discuss it.
The ratio of cement to sand (volume ratio) should be about 1:2.
To prevent the equipment from pulling and rolling the safety island.
How to quote? The cost price of formwork and blanking is about 200 yuan, sediment is about 600-800 yuan, labor is about 800-1000 yuan, embedded pipes and auxiliary materials are about 100-200 yuan.
Scaffolding Adjustable Base Jack Nut
Many weak current friends have questions about its construction and quotation.
The safety island is an essential part of the parking lot.
Generally, the lowest price of a safety island with one entry and one exit gate is about 2000-2500 yuan.
The construction of the safety island shall be carried out with concrete on the occludable cement ground according to the specified size.
Galvanized pipe or PVC pipe shall be used for embedded wiring according to the requirements of wiring.
Do not fill with bricks and other materials where equipment needs to be installed.
