Water vapor can increase indoor humidity, or use a humidifier.
Very popular.
Why are micro cement and micro cement tiles so hot? 6.
Therefore, the best solution is to avoid construction in hot weather.
In the harsh environment, we just need to hide in the room, play with mobile phones and eat snacks.
How to solve the difficulty of low temperature construction of epoxy resin floor? 9.
To avoid this situation, the best solution is to use a specially designed winter self leveling.
▲ Henghe Yongsheng ▲ As the saying goes, it is impossible to have a proper temperature and a gentle breeze every day.
Recommended by excellent enterprises ▲ Xiupo Chemical ▲ October 19-21, 2022 ▲ April 21-23, 2023 Selected articles 1.
The special design can make it have good hardness at low temperature.
Floor dry goods: I will teach you how to make floor paint on the old cement floor Disclaimer: released, excerpted.
The high humidity construction environment is too humid, and the drying speed of the self leveling will become slow, which will also affect the strength, so the self leveling floor will have a hard shell phenomenon, affecting the floor quality.
Construction method of cement self leveling floor 10.
Cement self leveling PK epoxy self leveling, which type do you prefer? 3.
One is to boil it indoors.
Low humidity occurs in heated rooms in the north, and the relative humidity is often less than 20%, or even less than 10%.
In most areas of China, the temperature in winter is below 10 ℃.
If construction is necessary, there are two solutions.
Self leveling floor materials, also known as functional floor decoration materials, are flat, durable and decorative floor materials that can be quickly, economically and effectively obtained.
Construction scheme of epoxy resin self leveling floor (complete version) 8.
Second, after the construction of the self leveling floor, immediately paint clean water when you can walk.
In order to solve this problem, ventilation can be done in advance to remove moisture.
The “bad environment” encountered in the construction of self leveling floor is as follows, and constructive solutions are proposed.
It has good fluidity and stability.
However, for the construction of self leveling floor, it is a thought-provoking work to ensure the quality and complete the floor construction within the specified time limit.
How much do you know about the solidified floor? 7.
The self leveling ground after construction has high strength, crack resistance, smooth surface and excellent decorative effect.
The purpose of painting the interface agent is to form a film on the self leveling floor surface to reduce the speed of water evaporation.
After the first coat of clean water, paint the absorbent interface agent again to supplement the floor with water necessary for hydration reaction.
Bad weather conditions can occur at any time.
Self leveling construction process 2.
The low temperature is below 10 ℃.
The complete version of carborundum wear-resistant floor construction plan! 4.
Construction of emery wear-resistant floor and curing agent 5.
When self leveling construction is carried out in this environment, sanding will inevitably occur after polishing.
Too low temperature will lead to slow development of self leveling strength, insufficient strength, and sanding after grinding.
▲ Huizhi Diamond Light ▲ Sankeshu Paint ▲ Litec: 13925595097 The high temperature exceeds 30 ℃, especially in summer, most of the temperature is not suitable for self leveling floor construction, because when the temperature is too high, the curing speed is too fast, which will lead to the joint phenomenon of large-area factory floor.
