Intermediate and senior workers can use it, but junior workers cannot..
3) Personal performance meeting the requirements of the third level standard, and personal performance should be noted: ① The performance presided over by the technical director (or registered constructor) in the Standard refers to the project presided over and completed as the construction project manager or project technical director.
Among them, if the assessment indicators in the Standard are cumulative indicators, the performance presided over by the technical director (or registered constructor) will not be subject to cumulative assessment.
Factory buildings can be owned or leased by enterprises.
Scaffolding Ringlock System Parts
② The number of years for the technical director to declare performance will not be assessed, and the qualification level of the enterprise where the technical director is located will not be limited.
Personnel with technical titles refer to those who have obtained the professional title certificate issued by the department with professional title review authority, excluding economic personnel and personnel with a series of professional titles such as teaching and research.
2) Professional recognition: The professional title personnel in the Standard refer to the personnel with intermediate or above engineering series professional title, whose specialty is subject to the post specialty of the professional title certificate or the specialty learned in the graduation certificate.
04 Personnel with intermediate professional titles (assessed according to the requirements of the three-level standard) 1) Professional title recognition: professional titles refer to the professional and technical titles of engineering series reviewed by the personnel competent departments at or above the municipal level or authorized units.
03 Registered personnel (assessed according to the requirements of the Level III standard) 1) If the Level III standard does not specify the level of registered constructor, Level I or Level II can be used.
3) The problem of professional qualification: if the Standard specifies the professional qualifications of the personnel with professional titles and requires them to be complete, the applicant shall be composed of personnel with technical titles of corresponding professions, and each profession shall have at least one person; In the Standard, there is a limit on the specialties of personnel with technical titles, but no requirement for complete specialties, the number of applicants for corresponding specialties shall meet the requirements of the standard, and there is no requirement for the number of professionals of each category; The Standard does not define the specialties of personnel with technical titles, but requires that some of the specialties are complete, at least one person shall be qualified according to the required complete specialties, and the other applicants shall not be limited in their specialties.
2) The first level registered constructor is commonly used throughout the country, and the registration system is also unified across the country.
3) The secondary constructor registration system is available in all provincial departments, and some regions of the secondary constructor can register across provinces.
On November 2, the Ministry of Housing and Urban Rural Development issued the Notice on Issues Related to the Qualification of Construction Engineering Enterprises, which mentioned that enterprises with legal personality can directly apply for the second level qualification of general contracting and professional contracting.
02 The technical director (reviewed according to the secondary qualification standard, and provided the personal performance required by the tertiary standard) 1) first needs to meet the requirements of the corresponding years of secondary qualification, which is to meet the requirements of 8 years/10 years of work in the construction enterprise after obtaining the intermediate professional title or registered constructor from the technical personnel.
For those who apply for qualification for the first time, the net assets shall be assessed based on the registered capital specified in the business license of the enterprise.
③ When applying, the technical director shall provide the “basic information and performance table of the technical director (or registered person)” according to Annex 3 of the Implementation Opinions, without providing other materials of personal performance (refer to the specific requirements of each provincial department for the materials provided).
Owner’s equity includes paid in capital (or share capital), capital reserves, surplus reserves and undistributed profits.
Cross provincial registration takes a long time.
Today, I have compiled 56 FAQs for you.
The key points of declaration are as follows: 01 Enterprise assets (assessed according to the requirements of the secondary standard) 1) Net assets: enterprise net assets are the rights and interests of the enterprise owners (i.e.
2) The technical director shall meet the requirements of the professional title level of the corresponding discipline.
The enterprise shall provide the legal financial statements (full set of reports) of the previous year or the current period for the qualification application.
The professional qualifications of the technical personnel provided are similar to those required by the standard, and those approved by the qualification licensing department can be declared.
The amount is the balance of assets minus liabilities, which is the “owner’s equity” in the enterprise’s annual financial statements.
Therefore, the re registration can be directly operated in the national system.
investors or shareholders), which refers to the economic benefits enjoyed by the owners in the enterprise assets.
If the production plant with clear requirements in the standard is owned by the enterprise, the real estate certificate and other materials with the plant area meeting the requirements shall be provided; If it is an enterprise lease, it is necessary to provide the lease agreement and the lessor’s real estate certificate with the factory area meeting the requirements, and the lease expiration date should not be earlier than the date of acceptance of the enterprise qualification application.
If an enterprise has multiple workshops, it can be assessed accumulatively.
Please consult the provincial construction department registration center for permission.
About the professional title, detailed introduction is made in the professional title personnel section.
2) Factory building: the enterprise assets of Grade II qualification standard for professional contracting of steel structures still need to be assessed, which is required to reach 15000 square meters.
05 Technical workers (assessed according to the requirements of the third level standard) 1) The level of technical workers requires intermediate workers and above; The whole technician level is divided into: junior worker, intermediate worker and senior worker.
For example, the structural disciplines in the Standard include: civil engineering, industrial and civil construction, structure, building construction, building engineering and other disciplines; Geotechnical disciplines include: geotechnical engineering, underground engineering, hydrogeological engineering, tunnel engineering, mining engineering, geological exploration and mining; Mechanical disciplines include: mechanical engineering, automation, electromechanical engineering, equipment engineering, automatic control, mechanical design, mechanical manufacturing, mechanical equipment, mechanical electrical and other disciplines; Welding majors include: welding technology and engineering, pressure vessel, metal materials, thermal engineering (heat treatment), mechanical manufacturing (manufacturing engineering), boiler, material mechanics, material science and engineering, etc; Light source and lighting majors include: electric light source, optoelectronic technology science, photoelectric information engineering, optics, optical engineering, etc.
If multiple types of qualifications are applied for, the net assets of the enterprise will not be calculated and assessed cumulatively, and the highest value of the net assets index required by the qualification applied for and the qualification standards already owned by the enterprise shall prevail.
