5.
4.
For different mechanical equipment, corresponding entry acceptance records should be filled out.
Those that fail the acceptance are not allowed to be used.
Large and medium-sized machinery and equipment on site must be mobilized by dedicated personnel, and the use of large and medium-sized lifting equipment must be commanded by trained and certified professionals.
They should ensure sufficient sleep time to prevent fatigue during work, and it is strictly prohibited to start the car after drinking.
Careful implementation of seasonal labor protection and handover procedures
.
1、 Key points of construction measurement safety supervision: Construction measurement is the preliminary preparation work for engineering construction.
3.
3.
2、 Key points for safety supervision of construction machinery and equipment: 1.
Mechanical operators and drivers are not allowed to work overtime without permission.
When measuring on bridge piers, there should be safety measures for up and down piers and preventing human fall.
Mechanical operators must hold a certificate to work, strictly follow safety operating procedures, and fill in mechanical operation records and routine maintenance records every day.
When measuring on highways, streets, and busy roads, there must be a dedicated person on guard to prevent traffic accidents.
The “three certificates” refer to the design or production license, product production qualification certificate, and the “use license” recently issued by various special equipment supervision and inspection institutions.
During the use of machinery and equipment, regular maintenance should be carried out, and operations with defects are not allowed.
5.
2.
All mechanical equipment entering the site must have safety operating procedures, and overloaded and barbaric operations are strictly prohibited.
If the safety protection devices are incomplete, ineffective, or damaged, they must be repaired or replaced and tested, and signed by the safety supervision engineer before use.
Any equipment that has been repaired and maintained should be truthfully recorded in the equipment ledger.
Large lifting machinery assembled or installed on site, such as gantry cranes, tower cranes, construction elevators, and bridge erecting machines, must undergo self inspection and approval by industry inspection departments before being put into use.
1.
When measuring on steep slopes and dangerous areas, safety belts should be worn and soft soled lightweight shoes should be worn.
Due to the frequent exposure of construction surveying personnel to unfamiliar and complex terrain, great attention should be paid to ensuring life safety.
When conducting hydrological surveys at night, sufficient lighting equipment must be available.
Mechanical equipment or vehicles put into construction must be inspected for their “three certificates” status, and unlicensed machinery is strictly prohibited from entering the construction site for operation.
For the entry of various large and medium-sized machinery and equipment, as well as pressure vessels, the contractor should be urged to carefully inspect and accept them.
6.
Hydrological survey personnel should wear life jackets.
When measuring personnel working near the high-voltage line, they must maintain a sufficient safety distance and must not stay under the high-voltage line or large trees in case of thunderstorms.
