6.
(3) water based coating finishing works – the coating color is uneven.
(4) water based coating finishing engineering – film bottom penetration 1) phenomenon: the film lacks the ability to cover the bottom layer or misses painting, so that the color of the bottom layer is still vaguely visible.
④ the pitted surface and small holes on the base course surface shall be repaired and leveled.
It not only costs money, but also tends to produce a sense of depression and easy to be outdated over time.
2) prevention measures ① the base (base) shall be dry, and the moisture content of concrete and plastering surface shall not be greater than 10 ` 10.
⑥ finishing works shall be carried out after installation works are completed.
It can be simpler, so it is not easy to feel visual fatigue.
Pay attention to the color matching.
The ceiling should not be so complex.
③ the moisture content of the base course shall be less than 10%.
② when the color of the base material is too dark and the color of the coating is too light, in order to ensure good covering power, one more layer of coating can be applied thinly.
2) prevention measures ① when water-based coating is applied on concrete or plastered wall, its moisture content shall not be greater than 10%; The moisture content during elastic coating shall not be greater than 8%.
Looking for acquaintances for decoration seems to save a lot of money, but sometimes it is acquaintances who are slaughtered..
③ before and during construction, fully mix the coating to make it uniform, and do not add water to dilute it arbitrarily.
③ avoid construction in an environment with too high temperature (above 35 ℃).
The slurry suction on the roughing roller shall not be too much or too little.
5.
⑨ snap coating: first brush the base color coating on the base surface, and then snap coating after the base color coating is dry.
④ correct operation, continuous coating construction, spraying construction can avoid brushing lines.
⑤ the coating shall be stirred evenly before application.
④ brush in sequence to avoid missing coating.
③ the surface of concrete or mortar base course of internal and external walls of new buildings shall be coated with supporting alkali resistant sealing primer; After the loose old decoration layer is removed from the old wall, the interface treatment agent shall be applied.
7.
Not only the quality is difficult to guarantee, but also the labor cost is high.
TV cabinets and other cabinets should not be made by carpenters.
3.
Too many colors will make the living room tacky and messy.
When the emulsion coating is applied to concrete or plastering base, the moisture content should not exceed 10%.
9.
After the putty is dry, grind it flat and remove the floating powder, it can be applied.
Don’t install too many lamps in the living room.
④ cover shall be used at the corner to avoid overlapping the coatings on the two surfaces.
It is still necessary to do more storage cabinets, which can increase the storage space and will not make the living room look too messy.
After the film is dry, a trace of uneven lines still exist.
How much does the price of new house decoration need? How much does it cost to paint the wall? Paint wall construction often has many problems, so do you understand these problems? Let’s introduce the relevant contents to you today! Let’s take a look at the water-based paint finishing project and be a master of decoration.
② control the coating thickness, generally within the film thickness of 20-25 μ M is appropriate (refers to dry film).
Long press the fingerprint} key to pay attention! How to choose a home decoration design company? 36 details of decoration regret 1.
It will turn black and look ugly after a long time.
The spraying distance is generally 40-60mm.
The cracking caused by the wall or plastering layer is almost half the cracking of the film itself and the putty layer.
2) prevention and control measures ① after the base course treatment, apply the sealing primer matching with the surface coating, and apply the putty thinly and evenly.
I hope it will be helpful to you.
After coating, the finished product protection shall be strengthened.
② dividing joints shall be set on the plastering layer of the outer wall, and the horizontal dividing joints can be set at the floor boundary; Vertical dividing joints can be set on both sides of doors and windows or on the axis, and the spacing should be 2-3m.
During elastic coating, pay attention to uniform and appropriate elastic point density, and there is no obvious connection mark up, down, left and right.
1) the color depth of the coating is inconsistent on the same wall, or there are joints.
(2) water based coating finishing works – brush lines or joint marks 1) phenomenon: brush or roller marks appear in the coating, or the joint marks are obvious at the overlapping part of the coating.
8.
② select appropriate brush or roller according to the coating used, and clean and replace the brush in time.
2.
(5) water based paint finishing engineering – film cracking 1) phenomenon the film on the inner and outer walls may crack.
When buying tile pointing agent, you must not choose white.
Although the living room is paved with solid wood floor, it feels good and beautiful, but it is really hard to maintain the solid wood floor.
It is too thick for construction; Too thin, affecting the coating thickness and easy to flow.
Many lamps use less, have low practicability and waste money.
It is suggested that the purchase of living room lamps should be based on usability.
② as the coating is easy to precipitate and layer, the coating must be mixed evenly during use, and water shall not be added arbitrarily.
⑥ brushing: the direction and stroke length shall be consistent.
There must be no more than three main colors in the space.
③ the construction ambient temperature of ordinary coating shall be kept above 5 ℃.
⑤ the coating shall be continuous, and the joint shall be at the grid joint or internal and external corners.
The above is what Xiaobian introduced to you.
Living room (9) 1.
2) prevention measures ① the plastering surface shall be calendered without cracks.
⑧ spraying: the consistency of the coating must be moderate.
2) prevention and control measures ① for the same project, the same factory and batch of coatings shall be selected and purchased.
In the small living room, do not choose large furniture, which not only occupies space, but also inconvenient to move.
(1) water based paint finishing engineering – paint falling 1) phenomenon under the action of self weight, the paint can not hang well and flow downward in the form of tear marks or hanging curtain.
It is better to choose customized cabinets, which are more practical and more beautiful.
⑦ rolling coating: when rolling coating with small gap and thin coating, the wool roller with long, fine and soft bristles shall be selected; When rolling the coating with larger thickness and slightly thicker, the wool roller with shorter, thicker and harder bristles shall be selected.
4.
