The nail cap of self tapping screws is required to be flush with the surface of wood plastic floor, and the spacing between wood plastic floors is 5mm ， this kind of floor is b22-140 wood plastic floor, which is fixed with wood plastic keel with self tapping screws at the beginning and end of the floor, The self tapping screw nail cap is required to be flush with the surface of wood plastic floor.
Please avoid the impact or collision of heavy objects during use.
Galvanized steel shall be used just now, and the welding slag shall be removed from the parts of electric welding links for rust prevention treatment.
It is required that the screw nail cap is lower than the surface of wood plastic keel.
4.
The junction points of other wood plastic floors and wood plastic keel use plastic clips to connect and fasten the wood plastic floor and wood plastic keel.
This kind of floor is k26-146 wood plastic floor.
The spacing between fixed points of plastic expansion pipe is 500mm ~ 600mm.
The spacing of wood plastic floors is determined by plastic clips.
Assembly diagram of three kinds of floors ， this kind of floor is k31-140 wood plastic floor, which is directly fixed on the wood plastic keel with self tapping screws.
Abstract: wood plastic materials are more and more used in outdoor decoration, and become the best material to replace anti-corrosion wood.
Precautions for the installation of wood plastic floor # 1.
Requirements for fixing keel: the installation working surface shall be flat without pits, and the keel spacing l shall be 300mm ~ 350mm.
3.
2.
Stainless steel clips are used to connect and fasten the wood plastic floor and wood plastic keel at the junction of other wood plastic floors and wood plastic keel.
For the paving of large-area wood plastic floor, it is recommended to use the installation method shown in the figure, and the length of each wood plastic floor shall not exceed 2m.
4.
At the same time, the end joints between keel rows shall be staggered and not in a straight line.
For the paving of wood plastic floor in the bend, both ends of each wood plastic floor shall be cut according to the length and angle of the bend before paving.
This is very important.
Fixation of keel # fixation of wood plastic keel directly fixes the wood plastic keel on the ground with expansion pipe.
The butt joint at the end of the keel shall be left with a spacing of about 10mm to facilitate drainage.
2.
The center distance of the keel shall be controlled between 310-410mm.
So, what is the installation method of wood plastic floor and what are the precautions for wood plastic floor installation? Installation method of wood plastic floor # 1.
Use self tapping screws to fix the wood plastic floor and wood plastic keel at the beginning and end of the floor.
The size of the floor splicing gap shall be reasonably determined according to the temperature and humidity of the environment when the wood plastic floor is installed, the length of the floor, the moisture content of the floor, and the specific situation of the laying area.
For the wood plastic floor pavement of steps, it is recommended to use metal strips to protect the wood plastic floor for the external corners of steps.
During the storage, transportation and installation of materials, please pay attention to proper treatment to avoid falling from height and damage.
Due to its waterproof and anti-corrosion characteristics, it is mainly used for outdoor platforms, such as outdoor floors, guardrails and so on.
3.
The nail cap of self tapping screws is required to be flush with the surface of wood plastic floor.
Specific installation process of wood plastic floor # 1.
Preparation before construction of wood plastic floor, ensure that the concrete base floor of the construction site is flat before construction.
2.
The allowable error of keel spacing is less than 10mm, the flatness is less than 3mm, and the expansion joint with the wall is 8-10mm.
When the construction conditions of the base floor at the construction site are poor and the main structure cannot be stable, it is necessary to use steel keel instead of wood plastic keel.
When fixing the wood plastic keel, it is necessary to make the whole flat.
7.
Due to the high density of wood plastic material itself, drill bit shall be used to guide the hole where self tapping screw is used, and then fasten the self tapping screw.
。.
Edge banding} 5.
I hope you don’t force the construction in order to save trouble, otherwise the losses will outweigh the gains.
The spacing of wood plastic floor is determined by stainless steel buckle.
6.
