With the progress of production technology, today’s ceramic tiles are not only diverse in design and style, but also more and more varieties, such as glazed tiles, full body tiles, vitrified tiles, microcrystalline stones, etc., which are widely used in the decoration of modern family living rooms, kitchens, bathrooms and other spaces.
From the initial point sticking of cement mortar to the later spreading of cement mortar on the back of the brick, and then to the current hot thin pasting method, the hollowing and falling off of ceramic tiles can not be avoided.
Six causes and solutions to the problem of empty drum ✦ ceramic tile glue construction during inspection: forced adjustment after the adjustment time, take out the grout.
The area of each batch of scraping mortar shall be reduced.
Compared with ordinary cement mortar, ceramic tile adhesive has the advantages of strong adhesive force, good constructability, long adjustable time, etc., and greatly reduces the strength of thermal expansion and cold contraction, effectively solving the industrial problems such as hollowing, cracking and falling off of ceramic tiles.
At the same time, the laying process of ceramic tiles is also constantly improved.
If there is ponding of open water, it shall be sucked dry until there is no open water.
Solution: increase the inclination between the tooth scraper and the base surface.
Ceramic tile or stone falling during pasting ✦ four reasons and solutions for the construction of ceramic tile adhesive: the slurry is too thin, and water should be added in proportion when opening the slurry.
If there is dried glue in the perforations, clean the tooth scraper.
Meisheng Yaheng ceramic tile adhesive is a polymer modified ceramic tile adhesive that is fully mixed and stirred by machinery with high-quality cement, graded sand and gravel, polymer additives and mineral rubber powder in a fixed proportion.
There shall be no glue adhesion by hand without touching.
Solution: slow down the scraping speed.
There is hollowing on the back of ceramic tiles ✦ one reason for the problem of ceramic tile glue construction: use a larger tooth scraper.
During the inspection, it is found that there is no glue on the back of ceramic tile or the bonding area is insufficient ✦ five causes and solutions to the problem of ceramic tile glue construction: the weather is hot and dry, and the scraping area of each batch is too large, resulting in water loss on the surface of some glue.
The slurry is mixed unevenly.
What is the reason? Today, I will share with you the six common problems in tile glue construction to help you stay away from the trouble of tile paving.
Weak bonding and insufficient bonding force ✦ three reasons and solutions for the construction of ceramic tile adhesive: there are loose objects (dust, etc.) on the base surface, which should be removed.
Meisheng Yaheng tile adhesive is your must…
It shall be scraped off and then plastered again.
The thickness of the mortar is not enough, and it needs to be supplemented.
Uneven rack like glue layer ✦ the second reason for the problem of tile glue construction: the thickness of the scraped glue is not enough.
If the weight of ceramic tile or stone is too large, it should be constructed from bottom to top.
If there is oil stain or oil stain, clean it.
If the adhesive mixing is uneven, the adhesive shall be fully mixed.
