After construction, the color difference on the wall surface will be visually aggravated.
Solutions: 1.
Pay attention to the color differences of certain colors under the conditions of backlight and positive light, direct sunlight and refraction.
Solution: use high-quality coating tools to avoid uneven coating and uneven thickness.
3.
2.
The plane effect and the matte effect will produce sensory differences.
The exterior wall real stone paint is widely applied to the exterior walls of new buildings because of its high lifelike natural stone effect, cheaper cost than natural stone, and more environmental protection and energy conservation.
Reason 2: natural colored sand is generally used for real stone paint.
Source: the article is transferred from the Internet.
Due to the influence of objective factors of natural raw materials, it is easy to have slight color difference between different batches during the production of real stone paint.
It is suggested that the same batch of materials and the same batch of people should be used to construct the same wall.
Many of the original mosaic exterior walls or ceramic tile exterior walls are also decorated with real stone paint.
The overall wall surface shall be from top to bottom in one go to avoid the new and old colors caused by intermittent construction.
Reason 3: of course, if the same batch of real stone paint is applied to the wall, the color difference will occur due to the lack of uniform mixing, inconsistent dilution and different construction methods.
We respect originality,.
This is what we often say.
To solve the problem of color difference of real stone paint, it is necessary to start with the causes of color difference: reason 1: poor quality tools used in real stone paint coating are easy to cause color difference, and poor coating tools will cause uneven painting and different thickness, resulting in color difference.
Repair color difference: after the construction of one wall, try to leave several barrels of the same batch of products to repair the defective wall at the end of the project to avoid the color difference caused by the end of the project.
Different types of products shall strictly follow the exclusive construction tools of the product, and there shall be no common unified construction tools for different products.
Select a professional team with rich construction experience.
However, after the construction of some projects, there will be an embarrassing situation that there are two faces on one wall.
Solution: try to supply the required products at one time in the same building; In case of batch supply at different times, the color sand raw materials shall be prepared through negotiation with the manufacturer to reduce the color difference in raw materials.
