No casualties were found at the scene.
The fire was caused by the improper operation of construction worker Liu during the gas welding operation.
If the accident is light, it will cause property damage and heavy casualties.
According to Article 64 of the Fire Protection Law of the People’s Republic of China, those who instruct or force others to violate the fire safety regulations and operate at risk shall be detained for not less than 10 days but not more than 15 days and may also be fined not more than 500 yuan; If the circumstances are relatively minor, a warning or a fine of not more than 500 yuan shall be imposed.
Click “watching” to share.
.
The fire hazard of welding operation Electric welding and cutting belongs to open fire operation, and the temperature of the welding point can usually reach 3600-6000 ℃, with high temperature, high pressure, flammable and explosive hazards.
When splashing or contacting with wood, cotton and hemp and other combustible materials, it can smolder and spread, causing fire; It is likely to cause explosion when contacting with explosive gas.
The fire fighters quickly arrived at the scene to carry out the fire fighting work.
On August 8, 2020, a worker in a factory in Chendai Town, Jinjiang City, Fujian Province, illegally welded and cut the sponge stack, which caused a fire.
Article 63 of the Fire Protection Law of the People’s Republic of China stipulates that anyone who uses open fire in violation of regulations or smokes or uses open fire in places with fire and explosion risks may be given a warning or fined not more than 500 yuan, and if the circumstances are serious, he shall be detained for not more than five days.
After investigation by the public security organ, Liu confessed to his illegal act of causing fire due to his negligence.
The spark of electric welding ignited the combustibles in the warehouse and caused a fire.
The construction unit must use the hot work operators who have passed the national formal training and examination, and the welding and cutting operation items should be consistent with the qualification certificate in the special type of work operation certificate obtained.
Fire extinguishing equipment shall be equipped for hot work such as welding, cutting, baking or heating on site, and hot work supervisor shall be set.
Electric welding and gas welding belong to hot work.
If there is no problem, leave the site without leaving a dead corner.
After investigation, the hotel was idle and not open at the time of the fire.
Before operation, the surrounding combustible materials shall be moved to a safe place.
Electric welding, gas welding, gas cutting, grinding wheel cutting, painting and other construction and maintenance operations with fire risk are prohibited in the densely populated places that are being operated and used.
Past case: On April 19, 2021, a man in Yiwu City, Zhejiang Province carried out welding operations without a certificate.
The fire occurred at the iron frame of the outdoor billboard on the seventh floor of the hotel.
To avoid fire and eliminate fire hazards, it is necessary to take precautions from the source and strictly manage the safety of the construction site, implement the safety responsibility system level by level, clarify the division of responsibilities of personnel, strengthen the review of construction operators entering the site, and strictly control the safety measures.
The open fire was soon extinguished.
According to the relevant provisions of the Fire Protection Law of the People’s Republic of China, Liu was sentenced to administrative detention for 10 days according to law.
Article 21 of the Fire Protection Law of the People’s Republic of China and the Fire Protection Law of the People’s Republic of China stipulates that if it is necessary to use open fire for operation due to special circumstances such as construction, the examination and approval procedures shall be handled in advance according to regulations, and corresponding fire safety measures shall be taken; Operators shall comply with fire safety regulations.
Recently, a fire occurred on the outdoor billboard of a hotel in Humen Town, Dongguan City, Guangdong Province.
After the completion of the construction operation, the kindling shall be eliminated immediately, the work site shall be thoroughly cleaned, and a period of supervision shall be carried out.
Personnel who carry out electric welding, gas welding and other operations with fire hazards and the operation of automatic fire protection system must work with certificates and comply with the provisions of fire safety operation.
If they cannot be moved, they can be covered with non-combustible materials.
Secondly, there is a large amount of sparks and high-temperature welding slag splashing during welding.
A Xiao reminds that the safety of any production activity must be put first! Recommended reading: “Emergency Mission · 2021” earthquake relief drill held in Sichuan Have you ever been to the Fire Museum? How could the doll be caught by the doll machine? Snakes come and go, please pay attention! The woman drowned, and “Blue Friend” made an amazing move zgxfxmt@126.com I think the article is good.
If the preventive measures are not in place, it is easy to cause explosion, fire and other accidents.
