In today’s wall decoration materials, more and more people choose to use art paint, which is becoming a common decoration paint
. 
Art paint not only has the function of covering the wall with ordinary paint, but also has a variety of complex colors, textures and textures that are different from ordinary decorative paint, which are difficult to achieve with ordinary paint
. 
No matter from the whole process of service, or the raw materials, construction technology, construction tools, the operation procedures and technical requirements are different from ordinary coatings
. 
Art paint is a new and fashionable wall decoration material, which brings users a new wall decoration effect
. 
Will bring a revolutionary change in wall decoration
. 
Art paint construction process — first, base treatment
. 
1
.
Before applying putty, the loose, peeling, hollowing and powdered base should be thoroughly removed, and then the dust, oil and other pollutants should be removed
.
2
.
The joints shall be filled and leveled, the concrete interface agent shall be painted, the external wall putty shall be used to repair the wall, the first local leveling shall be conducted, and the large holes and gaps shall be filled with flexible putty
.
After the putty is dry, the local grinding shall be conducted, and then the flexible putty shall be applied to make the base level
.
3
.
After the putty is completely dry, grind it to make the base level
.
Apply the flexible putty again and polish it to make the base level（ Art paint itself is concave convex state, the smoothness of the base is higher than that of the flat coating process, which can increase the number of times of grinding and the degree of delicacy
.
The external wall putty is the flexible waterproof putty for the external wall, which also needs to be cured
.
Generally, the curing time is 14 days, and the next process can be carried out only when the pH value is less than 10 and the moisture content is less than 10%) 2、 Make a texture
.
1
.
Mix the facing mortar material with water according to the specified water cement ratio for 5 minutes, rest for 3 ~ 5 minutes, and then use it again
.
Use putty knife to finish it manually once, with the thickness of 1 ~ 50px
.
The internal and external corners should be scraped with a long ruler, and then leveled with putty knife, and all surface holes should be filled
.
2
.
Surface treatment: manual roller coating texture with roller brush
.
3、 Precautions for spraying topcoat: construction sequence: from top to bottom, first detail, then large surface
.
Process lap: every painting is bounded by the junction of the dividing line and the internal and external corners of the wall
.
。
.
