Click the blue word to follow me, introduction of solidified floor introduction of solidified floor: Concrete sealing and curing agent floor is a new generation of lithium ion water-based products, colorless, odorless, non-toxic, non combustible
.
Through effective penetration of 3-5mm, a series of complex chemical reactions occur with free calcium and magnesium ions in the concrete, forming a network structure in the three-dimensional space, solidifying various components in the concrete into a solid entity, so as to obtain a dust-free, dense whole, and the pores are effectively sealed, so as to permanently avoid concrete dust precipitation from the surface
.
The strength, density and wear resistance are effectively improved by gold casting
.
It is a kind of nano ion water-based product with the main features of sealing, dustproof and wear resistance
.
Solidify the floor: 1
.
Improve the strength and hardness permanently It can make the components of concrete solidify into a hard entity and form a three-dimensional space network structure, so as to increase the density, strength and hardness of concrete, and greatly improve the anti-wear ability and surface weather resistance of concrete
.
After receiving light, the smooth surface will produce beautiful luster like marble
.
After 30 days, the compressive strength of the concrete treated with this product is more than 40% higher than that of the untreated and fully matured concrete, and the strength increases continuously with time
.
2
.
Permanent sealing and impermeability It only needs to be used once
.
The concrete is cured and sealed permanently in its life cycle
.
It can resist any oil and other dirt
.
3
.
Permanent curing concrete For the new concrete floor, the generation of micro cracks and temperature difference cracks can be restrained
.
When the construction is applied to the strong concrete which has been properly poured and just completed, the substances generated by chemical reaction with the concrete components will retain the water which is very important to the hydration process, and the consistent maintenance of concrete
.
4
.
Permanent dust free This product reacts with the silicate in the concrete to permanently eliminate the concrete particles released from the surface voids, so as to prevent ash
.
5
.
Super binding ability Due to the elimination of unfavorable concrete salts on the surface, the treated surface is more conducive to the use of painting, waterproof materials, binders and flooring materials, and the combination and compatibility with any kind of coating materials
.
6
.
Save a lot of repair and maintenance costs There is no need to wax, just mop the floor with clean water
.
Scope of application: It is suitable for factories, warehouses, docks and underground parking
.
It is used for concrete floors that need wear resistance, impact resistance and dust reduction, such as warehouses, docks, factories, parking lots, repair workshops, garages, warehouse type shopping malls, docks and places that need uniform colors to improve the working hygiene environment and beauty, without corrosive media
.
Introduction to construction process 1
.
New cement floor curing for two weeks / terrazzo curing for 7-10 days, clean up the dirt on the concrete floor (e.g Such as cement slag, paint block, garbage, dust, etc.)
.
2
.
Clean the ground thoroughly with water
.
When the ground is 80% dry, hchm concrete sealing curing agent can be applied
.
Spray the product on the ground with the amount of about 0.3 kg / m2, push it evenly with dust, and let the curing agent penetrate into the concrete as much as possible
.
3
.
After 1-2 hours of construction, if residual curing agent is found in the lower part, it should be pushed to the dry area from the lower part or completely removed from the surface
.
4
.
Construction time: about 3 hours, after construction, the floor is dry and can walk
.
After ventilation and drying for 3 days, the resin grinding plate (usually 300-1000 mesh) was used for polishing, and the brightness showed strong luster
.
Follow me and find out more.
.
