Before the commencement of decoration until the furniture and household appliances enter the site, the finished protective film shall be used to wrap the entrance door.
After the floor drain is installed, the floor drain shall also be protected.
Noise, dust, idlers, etc.
At the same time, door protection can also play a role in informing.
Where the protective film cannot cover, such as window frame, it is also necessary to stick special adhesive tape without residual adhesive.
home decoration Finished product protection what is a civilized construction site? What is the use of protective film on the construction site? Are all kinds of protection just face engineering? What exactly do they do These finished product protection measures on the construction site are really not image projects! After all, this is the first step of home decoration, an essential procedure and a key work throughout the whole home decoration process.
A small information bulletin board on the door protection can also tell neighbors that my house is under decoration.
Please forgive me if you disturb me.
go in and out, occupy the elevator for a long time, and the decoration makes the neighbors miserable.
Good finished product protection is an important step related to ensuring project quality, reducing construction cost and completing on schedule.
In addition, the distribution box shall also be insulated to prevent electric shock during construction.
After the transformation of floor drain protection water and electricity, we must seal the water pipe orifice with packaging bags or cloth to prevent sundries such as later decoration cement from falling into the water pipe and blocking it.
According to the size of the window, the protective film shall be cut and pasted.
Build high-quality construction site family decoration at the level of model room, and more people choose Yezhifeng for one-time decoration and lifelong friends..
Window protection window belongs to a vulnerable place at home, and protection is essential.
Furniture and electrical protection Electrical appliances, customized cabinets, furniture and wooden doors entering in advance must be protected and covered with a layer of protective film to avoid damage caused by heavy objects, metals or sharp instruments.
How much can these seemingly insignificant site protection measures play! Door protection During decoration, all materials and construction waste need to pass through the entrance door.
In order to use electricity safely and prevent cement mortar from running into the installed switch socket box, we should carry out corresponding protection.
Paying attention to the management of finished product protection on the construction site is not a fake “superficial article”, but the control from outside to inside and from outside to inside, so that every link of project quality can be guaranteed.
Xiaobian will take you to uncover the secret today.
At this time, there will be a lot of alkaline substances, which will also corrode the floor drain.
The window handle shall also be wrapped with protective film and bonded firmly.
Therefore, in the protection of finished products, we must first protect the entrance door.
After the completion of tile laying, in order to consider the safety and beauty of bathroom equipment installation in the later stage and prevent scraping in the construction of other processes in the next stage, the floor protective film (such as EVA + textile cloth) should be used for protection after the floor tile surface is cleaned.
At the same time, it can avoid falling ash and facilitate cleaning after entering.
I believe you all know that the 99% conversations make complaints about “the decoration next door”.
At the same time, the wall and ground also need to be firmly pasted with protective film.
Ground protection The least protection work is the protection of the ground, because no matter what space is to be demolished, the ground will pass through, and a large amount of construction waste after demolition is also transported from the ground, so the protection of the ground is an important link in the basic protection.
After completing the construction of concealed works for hydropower protection, the next stage is the geotechnical finishing stage.
It is inevitable that there will be collision and friction with the entrance door when carrying articles.
