Construction project department and site supervision department: how to allocate personnel? How to divide the work?

Full time safety Officer [job conditions] Obtain the safety production assessment certificate of full-time safety production managers issued by the provincial competent department of housing and urban rural construction.

[main responsibilities] (1) preside over the technical management of the project; (2) Preside over the formulation of the project technical management work plan; (3) check and receive the design drawings stamped with the special seal for construction drawing review as required, participate in the drawing joint review and design disclosure, and confirm the results; (4) organize relevant personnel to get familiar with and review the drawings, preside over the preparation and implementation of the construction scheme of the project management implementation plan; (5) be responsible for the technical disclosure; (6) Organize the measurement and verification; (7) guide the quality inspection and test; (8) implement the provisions on safety management of divisional and subdivisional works with high risk and the project quality and Safety Manual (Trial) issued by the Ministry of housing and urban rural development And other documents; specifically organize the preparation and submission of construction organization design, major hazard identification and control scheme and special construction scheme, review the operation instructions and organize the implementation; if there is a subcontractor, it shall be responsible for supervising and urging the implementation of the corresponding work of the subcontractor.

[Main Responsibilities] (1) preside over the work of the project management department, implement construction project management on behalf of the enterprise, implement national laws, regulations, guidelines, policies and mandatory standards, implement the enterprise’s management system, and safeguard the legitimate rights and interests of the enterprise; (2) Implement various management objectives and specified tasks assigned by the enterprise to the project; (3) Organize the preparation of project management implementation plan and various management systems; (4) Optimize the allocation and dynamic management of construction personnel, construction machines and tools, building materials and other production factors entering the site, and pay special attention to the on-the-job performance management of personnel at key posts and special operations of the project; (5) Establish quality (including fire fighting construction quality) management system and safety system, implement the provisions on safety management of divisional and subdivisional works with high risk, project quality and Safety Manual (Trial) and other documents issued by the Ministry of housing and urban rural development, and in accordance with the standards for safety production evaluation of construction enterprises, standards for safety inspection of construction Organize the implementation of standardization work, carry out on-site civilized construction management, find and deal with emergencies, such as the code for quality management of engineering construction enterprises; (6) implement the quality and safety responsibility in accordance with the notice of the Ministry of housing and urban rural development on printing and distributing the ten provisions on quality and safety responsibility of construction project managers (trial operation).

The technical director of the project of level II project shall have a college degree or above, an intermediate professional title suitable for the project, and have been engaged in the technical management of relevant disciplines for more than 5 years.

If there is any infringement, please contact and delete it.

The measures put forward the minimum staffing standards for key posts according to the project scale, and summarized the employment conditions and main responsibilities of personnel in each post, which is very helpful for the establishment of construction project department and on-site supervision department, staffing, assessment and management, and is worthy of your reference! Staffing standards for key posts construction project department: site supervision department: job conditions and main responsibilities of key posts construction project department: 1 project leader [job conditions] (1) obtain the corresponding constructor registration certificate; (2) Obtain the safety production assessment certificate of the project leader issued by the provincial competent department of housing and urban rural construction.

(7) do a good job in the construction site management and civilized construction to ensure that the site is clean and the materials are stacked neatly and orderly.

(7) Within the scope of authorization, be responsible for coordination and process control with enterprise management, labor operation level, various cooperative units, the employer, subcontractors, supervision engineers and the owner, and solve problems in the process of project construction; (8) participate in divisional project acceptance and project completion acceptance, prepare settlement data, analysis and summary, and accept audit; (9) Deal with the aftermath of the project department; (10) assist the enterprise in project inspection, appraisal and award application.

(9) participate in the process acceptance and deal with quality and safety problems; (10) Organize the visa, collection, sorting and filing of various technical data; (11) organize technical learning and exchange of technical experience; (12) organize technical research.

Source: the copyright of Luban Alliance for construction engineering belongs to the original author.

Rebar Cap

The technical director of the project of level III project The person in charge shall have technical secondary school education or above, the title of assistant engineer in the discipline suitable for the project, and have been engaged in the technical management of relevant disciplines for more than 5 years.

Be responsible for summarizing, sorting and handing over the labor management data.

[classification] full-time safety production managers of machinery (C1 certificate) can be engaged in safety production management of hoisting machinery, earthwork machinery, piling machinery, etc.

2 the project technical director [job conditions] class I Project (divided according to the standards in Schedule 2 of the regulations on the management of engineering supervision enterprise qualification, the same below) The technical director of the project shall have a college degree or above, a senior professional title suitable for the project, and have been engaged in the technical management of relevant disciplines for more than 8 years.

4.

3.

[Main Responsibilities] (1) implement it Regulations on safety management of divisional and subdivisional works with high risk, project quality and Safety Manual (Trial) issued by the Ministry of housing and urban rural development and other documents; organize construction in strict accordance with relevant national standards, specifications, procedures, construction organization design, operation instructions for key and special processes, as well as design drawings, minutes of joint review of drawings, design changes and technical verification; (2) Organize relevant teams to get familiar with the construction drawings, make technical, quality, key and special processes and safety disclosure to the team operators, arrange process overlapping according to the construction organization design, make process handover records, and strive to complete the image schedule; (3) Participate in the formulation of labor management plan, participate in the establishment of project labor management organization and labor management system, reasonably arrange labor combination, timely make project construction records, concealed works records and visas, and fill in construction logs day by day; (4) Be responsible for or supervise the mobilization and employment management of labor personnel, review the identity and qualification of labor personnel, participate in the signing of labor subcontracting contracts, assess and evaluate the on-site construction management of labor teams, and scientifically arrange the supporting operations of various disciplines and three-dimensional cross operations between various types of work; (5) Be responsible for the collection and sorting of labor settlement data, participate in the settlement of labor fees, participate in or supervise the salary payment of labor workers, be responsible for the salary publicity of labor workers and the establishment of accounts, participate in the preparation and implementation of emergency plans for labor disputes, and participate in the mediation and handling of labor disputes and the aftermath of industrial accidents.

Recently, the Department of housing and urban rural development of Hunan Province issued the management measures for staffing of key posts of Hunan Construction Project Department and on-site supervision department, which will be implemented from March 15, 2021.

(6) Be responsible for preparing the management data of labor team and labor personnel.

full-time safety production managers of Civil Engineering (C2 certificate) Can be engaged in safety production management other than hoisting machinery, earthwork machinery, piling machinery and other safety production management work.

The constructor [job conditions] obtains the vocational training certificate (constructor) for professionals on the construction site in the field of housing and urban-rural construction.

Comprehensive full-time safety production management personnel (C3 certificate) can be engaged in all safety production management work..

The construction enterprise shall determine other conditions according to the project scale, complexity and professional requirements.