The construction technology and details of the hedgerow control that the real estate project has higher and higher technical requirements for soft scenery.
Today, I would like to summarize and share with you the construction technology for landing.
From scheme to construction, it is more and more testing the technical landing of designers.
01 Construction technology of square lattice hedge (1) Outline the ups and downs through small squares; (2) Backfill planting soil (the backfilling height is lower than the cornice of the square planting pool); (3) Trim the outer contour of the hedge according to the determined square grid trend to ensure the fluctuation relationship; (4) Ensure the planting density (it must be dense enough, even 64-81 trees per square meter, depending on the actual situation of the seedlings entering the site) (the picture comes from the network) 02 Construction technology of square hedge module (1) Accurate setting out before planting; (2) Ensure the planting density (it must be dense enough, even 64-81 seedlings per square meter, depending on the actual situation of the seedlings entering the site); (3) The outermost circle of hedges shall be perpendicular to the ground, and the facade effect shall be vertical and regular; (4) Finishing scissors (horizontal and vertical) (picture from network) 03 Construction technology of turtle back hedge (1) Micro topography; (2) The outermost hedgerow shall be planted at an angle of about 30 ° with the ground to ensure the bonding effect between the hedgerow and the ground; (3) Ensure the planting density (it must be dense enough, even 64-81 seedlings per square meter, depending on the actual situation of the seedlings entering the site); (4) Finishing scissors (curved surface) (picture from network) 04 Construction technology of “meat” hedgerow (1) Accurate setting out before planting; (2) Trenching and micro topography; (3) Planting hedges along the topographic trend to ensure the planting density of hedges; (4) The outermost hedgerow shall be planted at an angle of about 30 ° with the ground to ensure the bonding effect between the hedgerow and the ground; (5) Fine trimming scissors (the curved relationship on the surface is smooth, and the boundary between the hedge and the hedge bites naturally) (picture from the network) 05 Trimming artifact of small ball (the picture comes from the Internet) today’s Planting Day shares the construction technology and details of the hedge, hoping to help you——.
