For the renovation of the wall surface of the old house, the base course shall be sorted and leveled first, and the loose, peeling surface layer, dust, oil and other sundries shall be removed before construction.
Staff with more construction experience can be sure of the construction method of real stone paint, which will have a corresponding impact on the overall effect of real stone paint! 2.
It is forbidden to select inferior products.
3.
The service life is also relatively long.
Human factors exterior wall coating Real stone paint has its own set of strict construction technology (such as plain ground requirements, primer and back sealing solution).
The problem of bulging is that the bottom layer is bulging, which makes it feel that the real stone paint is bulging.
It is necessary to avoid unevenness, bulging and peeling.
The quality of real stone paint products is high.
Therefore, although the quality of real stone paint is good, it also requires experienced site staff.
Shovel off the uneven and bulging places until they can’t be removed, then remove the ash layer, brush a damp proof primer, scrape water-resistant putty for leveling when the primer is dry, and finally spray real stone paint.
4.
Therefore, the bottom layer must be solved before spraying real stone paint.
To solve the problem of hollowing and loosening of real stone paint, the most important thing is to deal with the base course, clean the dust and other binders on the surface of the base course, knock off the protruding part and polish it flat, chisel off the hollowing part and apply new putty, and then carry out the construction when it is dry and the holes are leveled, the wall surface is flat, the lines are straight and meet the requirements of standard construction acceptance specifications.
Construction problems real stone paint itself has a set of strict construction process procedures.
Let’s follow Xiaobian to see which 4 points can be reached, which can increase the service life of exterior wall paint- How to increase the service life of exterior wall coating – 1.
In addition, putty with good adhesion and stone paint with qualified quality shall be carefully used to improve the professional and technical training of staff…
The uneven condition of real stone paint occurs due to the uneven treatment of the bottom layer.
Before the construction of real stone paint, the surface base course of the construction substrate shall be flat, tidy and have good strength.
At this stage, real stone paint is dazzling in the sales market.
Weather conditions and temperature reasons: the exterior wall coating construction should be carried out under the condition of fine weather and appropriate temperature.
If it happens, it shall be rectified immediately to ensure the quality of the whole real stone paint project.
However, at this stage, the real stone paint of many small workshops usually circulates to the market without reaching the quality standard.
The bulging condition is generally related to the base material.
There are some low-end and poor paint quality, and many fake and shoddy goods are revealed in the sales market.
This happens when the quality of putty powder is too poor and the putty powder is not solved before construction.
The uneven, bulging and peeling of real stone paint are related to the treatment of the bottom layer.
And before spraying real stone paint, it is necessary to brush the special matching primer of real stone paint of Liuyuan Xingbang brand, which has the functions of alkali resistance, waterproof and moisture-proof.
3.
Exterior wall coating real stone paint is a kind of real stone paint that truly presents granite texture and grain.
The construction must not be carried out under extreme weather and low temperature- How to solve the peeling of real stone paint of exterior wall coating – 1.
2.
There are many small details in the construction of real stone paint, which should be paid special attention to, especially for large projects, and no mistakes should be made in these small details.
In the case of ignoring this process and constructing immediately, if the base is unstable, it is likely to cause wall spalling.
The application of high-quality exterior wall paint real stone paint is easy for users to achieve the desired effect in application.
The new wall surface shall be worked for one month before construction.
Normally, high-quality real stone paint has the characteristics of aging resistance and water resistance, and can be applicable to a variety of extreme climates.
The quality does not meet the actual standard, resulting in peeling, whitening and yellowing.
It can present the texture effect of natural stone in a variety of ways.
