If higher luster is required, use 2000 mesh or 3000 mesh grinding plate to polish according to the above method to increase luster…
If there is any ground damage or hole, repair and fill it with repair mortar.
At this time, the speed of the machine should be controlled to a uniform speed as far as possible, so that the ground can appear luster.
For rough and uneven ground, it is recommended to polish the ground with metal grinding block, and then grind with resin grinding plate.
Base course treatment: before the construction of the solidified floor, clean the loose ground, dust, sundries, etc.
Until all the coarse scratches left by 50 mesh grinding are eliminated and cleaned.
3.
6.
Construction tools: ground grinder, vacuum suction machine, multi-functional floor cleaner, rain shoes, wiper, floor mop, broom, dust push, watering pot, pipe, bucket, portable polishing machine, diamond resin grinding disc (50 mesh, 150 mesh, 300 mesh, 500 mesh, 1000 mesh, 2000 mesh, 3000 mesh) and diamond grinding disc (16#, 30, 80, 120).
1.
Brushing curing agent: after 150 mesh grinding, add 1:1 water to dilute the curing agent, spray it evenly on the ground with a watering pot, and keep the interior of the ground moist for 20 minutes.
5.
Clean it at the same time after grinding, and then grind it again with 500 mesh.
Click the blue words on the top to pay attention to me.
Cuplock Scaffolding Components
Rough grinding of the ground: grind with 50 mesh resin grinding plate at a constant speed, cross grinding, clean and then grind with 150 resin grinding plate.
Fine grinding of the ground: after the curing agent is dry, grind the infiltrated ground (water mill or dry mill) with 300 mesh resin grinding plate, and grind evenly to remove the residual materials on the ground.
4.
2.
If there is a dry place, scrape it with a wiper to ensure the complete and uniform penetration of the ground.
After one coat of spraying, let the ground dry until there is no obvious moisture, and then apply the second coat according to the above method.
Fine grinding and polishing: use 1000 mesh resin grinding plate to dry grind directly on the ground.
